Description: ±200 mA HV Benchtop Laser Diode Current Controller
Part Number | LDC202C |
---|---|
Category | Light |
Manufacturer | ThorLabs |
Need to purchase this item?
The LDC202C by ThorLabs is an advanced benchtop laser diode controller. This state-of-the-art device is designed to provide high performance when used with laser diodes and LEDs. With its exceptional stability and compatibility with a wide range of temperature controllers, the LDC202C is an essential tool for research and industrial applications.
One of the standout features of the LDC202C is its enhanced compliance voltage of over 10V, which makes it ideal for use with blue laser diodes. Additionally, the current range is expertly configured to ensure optimal performance for specific applications. The LDC202C is designed for optimal laser diode control and is capable of running laser diodes in constant current and power modes. It also supports all types of photodiode and laser diode configurations. Additionally, since the laser diode is drive with respect to ground, it results in reduced noise, quicker response times and improved stability over driver designs that work without grounding.
Using the LDC202C is a breeze thanks to its intuitive, user-friendly operation and 5-digit LED display. This display can show the laser current, photodiode monitor current, laser current limit, or optical power in mW. The unit also includes a variety of additional features at the rear, including a modulation input for laser current power that can be used to pulse the laser diode output, a control output that is proportional to the laser current, and a TTL input for remote laser on and off configuration. To connect the LDC202C to a compatible mount, a CAB400 cable that has a typical length of 1.5 m is needed.
The LDC202C is designed with protection features that ensure safe operation for both the user and the laser diode. These features include a current limit that prevents accidental adjustment and ensures that the maximum laser current cannot be exceeded. Additionally, an audible indicator alerts the user to any unsafe increase in laser drive current. The current source will automatically switch off the current output if the connection between the current source and the laser diode is interrupted, and an open current circuit can only be switched on with a separate key. Finally, a soft start when the laser current is turned on ensures the protection of the laser diode and allows for a slow increase of the laser current without voltage peaks.
Control Range | 0 to ±200 mA |
Compliance Voltage | >10 V |
Current Control Accuracy | ±100 µA |
Photocurrent Control Range | 25 µA to 10 mA |
Small Signal 3 dB Bandwidth, CC Mode | DC to 250 kHz |
Modulation Coefficient, CP Mode | 1 mA/V ± 5% |
Weight | <3.1 kg |
Dimensions | 146 mm x 77 mm x 320 mm |